2
• We do not
recommend the
use of power
drill/drivers
for
inserting screws
,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Assembly to be carried out by
a competent adult only.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• During assembly children
should be kept away from the
product due to possible risk of
injury.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• Do not use this item if any
components are missing or
damaged
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Regularly check all fastenings
to ensure that they properly
tightened.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Safety and Care Advice
IMPORTANT
must be fitted with 4 safety-rails and a ladder or platform for the upper bunk.
The high bed / bunk bed meets the European EN 747:2012 A1:2015 standards for security and durability.
MATTRESS:
This bed is designed to use a mattress size 190 cm long and 90 cm wide. The total thickness must not
exceed 15,5 cm. The mattress top must not pass the marking on the ladder / the post for the safety-rail.
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of
injury from falls. Bunk beds and high beds can present a serious risk of injury from strangulation if not used
correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the
bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags.
Children can be become trapped between the bed and the wall, a roof pitch, the ceiling, adjoining
pieces of furniture (e.g. cupboards) and the like. To avoid risk of serious injury the distance between
the top safety barrier and the adjoining structure shall not exceed 75 mm or shall be more than 230 mm.
Do not use the high bed / bunk bed if any structural part is broken or missing.
MAINTENANCE INSTRUCTIONS:
Ventilation of the room is necessary in order to keep the humidity low and to prevent mould in and
around the bed.
Always follow the manufacturer s instructions. Current legislation requires that the high bed / bunk bed
ASSEMBLY:
injury from falls.
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of
WARNING:
'
Check regulary that all assembly fastenings are properly tightened.
- READ CAREFULLY
- RETAIN FOR FUTURE REFERENCE
