STOLZENBERG KSV 910, Руководство по эксплуатации

Страница: 11 / 21

Operation
11/06/2010 KSV 910 9
4.4 After sweeping
Switch off the machine.
Adjust the side brushes and sweeping rollers in the upper position.
If the sweeping rollers are not set to their top position, the bristles
of the side brushes will be put under permanent load in their off-
position and consequently will wear prematurely when used!
Always empty the dustbin once you've finished sweeping.
4.5 Setting the traversing mechanism
The traversing mechanism can be readjusted at the adjusting screws at
the handle and at the belt tensioner.
Adjust the belt tensioner in such a way that the belt lies loosely on
the handle without tension.
It should be possible to press the belt 4 cm inwards in the middle till the
first resistance is felt.
4.6 Parking the sweeper
•
Move the machine to an area provided (assigned) for the purpose.
•
The sweeper does not have any brakes.
•
Therefore, secure the sweeper against rolling away (for example:
wheel chocks).
•
Turn the key in the anticlockwise direction to switch off the motor
and pull out the key.
Improper handling of the suction sweeper can result in harm to
persons and property!
Prevent unauthorised usage of the suction sweeper, by:
Caution!
Caution!