Stoltzen APOLLO SA-3000D, Руководство пользователя

Страница: 10 / 20

8
No. Name Description
3
HDMI Out
Connect to an HDMI display device.
4
RS232
Connect this port to a RS232 device to bidirectionally
communicate with a RS232 device at the IP controller or
encoder side.
5
LAN (POE)
Connect to an Ethernet Switch for IP streaming input
and device control.
Note: The encoder and decoder can be powered by
either a PoE-enabled Ethernet switch via this port or
power adapters.
6
Reset LED
Reset key is used to reset device.
Use a pointed stylus to hold down this key, when Reset
LED is on for about 1 second and then off, release this
key, decoder reboots and restores to its factory default.
7
Reset Key