Stollmann BlueMod+B20, Руководство пользователя

Страница: 37 / 38

B20/BT2.1
User Guide
Release r03 www.stollmann.de Page 37 of 38
Select the PSKey “User configuration data 0” and press the “Delete” button.
Restoring PSKeys with PS Tool Step 2
After pressing the “Reset BC” button or power cycling the B20, it will operate
on the factory-default settings.
10.3 Troubleshooting
Update won’t start when using Stollmann B20 Updater
Check if the right COM-Port is selected and make sure the port is not used by other
applications running. Set the communication settings of your B20 to 115,200
bps, 8 data bits, no parity, 1 stop bit. Retry the update.
Update process has been interrupted by power loss / Cable replacement on
COM-Port
Redo the update by restarting the Stollmann B20 Updater.
Firmware won’t start after serial update, no answer on AT
Power cycle the B20, if the B20 is still not answering to AT
commands, redo the update with the Stollmann B20 Updater.