Grate Heater Unit
Blower Vent
Assembly
Gas Log Grate Heater
Installation Instructions - Photo Addendum
Fig. 5
Attach Blower Vent Assembly
to Grate Heater unit with
remaining 2 Phillips head
screws.
Attach here
Fig. 7
Trim Cover to fit opening.
Place end caps over trimmed
ends, making sure to place the
cord cut-out over the cord.
Trimmed Cover
Cap w/ Cord Cut-out
Cord
Fig. 8
Attach Cover to Motor Assem-
bly with 2 small supplied
screws.
Adjust Leveling Bolts up/down
to allow for a Level Unit.
Leveling Bolt
Fig. 6
Attach Heat Sensor Bar by
placing over thermal snap disc
and adding nuts to top and bot-
tom bolts on heat sensor
Heat Sensor Bar
Thermal Snap Disc
Motor Cover
Grate Heater Unit
Blower Vent
Assembly
Gas Log Grate Heater
Installation Instructions - Photo Addendum
Fig. 5
Attach Blower Vent Assembly
to Grate Heater unit with
remaining 2 Phillips head
screws.
Attach here
Fig. 7
Trim Cover to fit opening.
Place end caps over trimmed
ends, making sure to place the
cord cut-out over the cord.
Trimmed Cover
Cap w/ Cord Cut-out
Cord
Fig. 8
Attach Cover to Motor Assem-
bly with 2 small supplied
screws.
Adjust Leveling Bolts up/down
to allow for a Level Unit.
Leveling Bolt
Fig. 6
Attach Heat Sensor Bar by
placing over thermal snap disc
and adding nuts to top and bot-
tom bolts on heat sensor
Heat Sensor Bar
Thermal Snap Disc
Motor Cover
