Stoll CompactLine FC 150 H, Руководство по эксплуатации

Страница: 82 / 96

81 B58FC1 0000000094 EN 002
SERVICING
8.2.1 Service schedule
The specified service intervals are guidelines.
 Adjust the intervals according to the operating conditions.
 Consult with a workshop for any questions.
8.2.2 Service instructions for Comfort Drive
Maintenance on the Comfort Drive may only be performed by an authorised specialist workshop.
8.2.3 Service instructions for the hydraulic lines
⚠
WARNING
Risk of accident and injury due to defective hydraulic hose lines!
Defective or worn hydraulic hose lines can cause uncontrolled escaping of hydraulic fluid and injury to
persons nearby or the safety of the front loader can be impaired.

Do not use hydraulic hose lines that are more than 6 years old.

Do not use hydraulic hoses with tubing material that is more than 10 years old.

Shorten the replacement interval when hoses wear out prematurely.

For all work on the hydraulic system, wear personal protective equipment, especially oil-proof
gloves and goggles.

Have the hydraulic lines replaced if they are porous or cracked.
⚠
WARNING
Risk of injury due to hydraulic fluids under high pressure!
Even when the tractor is switched off or the front loader has been removed, the hydraulic system can
still be under pressure. Hydraulic fluid can escape under high pressure and cause personal injury.

Depressurize the hydraulic system before performing any service tasks.
In accordance with DIN 20066, hydraulic hose lines should be stored for a maximum of 2 years and
used for a maximum of 6 years from the date of manufacture. This results in a service life of at least
4 years with normal loading.
Hydraulic hose lines are marked with 2 dates:

On the hose material, e.g. "1Q15" for production of the hose in the 1st quarter of 2015;

on the fittings, e.g. "0415" or "04/15" for production of the hose line in April 2015.
Maintenance position Job
Interval
[operating hours]
Check the screw connections Check, tighten if necessary (see 11.3 Tightening torque for
screws )
100 h
Bearing positions Lubrication (refer to the lubrication schedule) 20 h
Front loader mountings (catch hooks) Lubrication (refer to the lubrication schedule) 100 h
Front loader locking mechanism Lubrication (refer to the lubrication schedule) 100 h
Comfort Drive Open and close the shut-off valve 100 h
1
Hydraulic hose lines Visual inspection, if necessary, have them replaced by an
authorized workshop 100 h
Replacement by authorized workshop 4 years
2
1
At least once a month
2
See information under 8.2.2 Service instructions for Comfort Drive