16 — English
PROBLEM
CAUSE
SOLUTION
Electric burner will not heat up
Circuit breaker is OFF.
GFCI is tripped.
Control knob is defective.
Electric burner is defective.
Turn ON the circuit breaker.
Reset the GFCI.
Replace control knob or contact
authorized service center.
Replace burner or contact authorized
service center.
Grease fire or continuous excessive
flames above cooking surface
Grease build up in burner area.
Turn control knob OFF ( O ) and
disconnect power cord. Leave hood
open allowing flames to extinguish.
Once cool, clean grill thoroughly.
Grill is not reaching desired temperature Control knob is set to low temperature.
Electric burner is defective.
Heat is escaping through open firebox
hood.
Reflectors inside the firebox hood are
dirty.
Adjust heat on control knob
Replace burner or contact authorized
service center.
Lower the firebox hood.
Use a cloth to remove grease and
residue from the reflectors.
Inside of firebox hood appears to be
peeling
This is a build up of grease.
Clean with a soft bristle brush or
scraper.
TROUBLESHOOTING
