10 — English
ASSEMBLY
STEP 4: ATTACHING FIREBOX HANDLE
See Figures 11 - 12.
Raise and open the stand.
Lift the hood latch then raise firebox hood.
Insert studs in firebox handle (A) through holes in firebox
hood.
Install wing nuts (AA) and tighten securely.
STEP 5: INSTALLING THE GREASE CUP
See Figure 13.
Slide the grease cup (B) into the cup holders on the bottom
of the grill.
NOTE:
Clean the grease cup after each use. Do not remove
the grease cup until after the grill has cooled completely.
Do not transport the grill with a dirty grease cup.
Fig. 11
HOOD
LATCH
FIREBOX
HOOD
FIREBOX
Fig. 12
WING
NUT
FIREBOX
HANDLE
FIREBOX
HOOD
Fig. 13
GREASE
CUP
STUD