8 — English
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully lift grill from the carton and place it on a level
work surface.
WARNING:
Do not use this product if any parts on the Loose Parts List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the grill carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected the grill, identified all loose parts, and
satisfactorily operated the grill.
NOTE:
Some loose parts are located inside the grill
assembly beneath the firebox hood.
If any parts are damaged or missing, please call
1-800-847-5993 for assistance.
WARNING:
If any parts are damaged or missing, do not operate
this grill until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
CAUTION:
Some parts may contain sharp edges that may cause
personal injury. Wear protective gloves if necessary.
STEP 1: ATTACHING THE WHEELS
See Figure 5 - 6.
With the grill out of the box and packaging removed,
place the grill right side up on flat surface.
Locate the holes in the stand legs.
Slide the axle (G) through the square hole in the left stand
leg and then through the round hole in the right stand leg.
Install the hitch pin (FF) into the hole in the axle to secure
it in place.
Raise the grill, slide washer (DD) and wheel (E) onto the
axle.
Using a second washer (DD) and screw (BB), secure the
wheel to the stand. Securely tighten screw.
Repeat this process to secure the other wheel.
Fig. 5
Fig. 6
Fig. 7
WASHER
WASHER
AXLE
SCREW
STEP 2: ATTACHING THE STAND FRONT
HANDLE
See Figure 7.
Locate the handle mounts on the firebox.
Align holes in stand front handle (F) with holes in mounts.
Install front handle using phillips screws (EE). Securely
tighten screws.
SCREW
MOUNT
STAND
FRONT
HANDLE
SQUARE
HOLE
ROUND
HOLE
AXLE
HOLE
HITCH
PIN
