6 — English
EXTENSION CORDS
Use only 3-wire extension cords that have 3-prong grounding
plugs and 3-pole receptacles that accept the appliance’s plug.
When using an appliance at a considerable distance from the
power source, use an extension cord heavy enough to carry
the current that the appliance will draw. An undersized cord
could cause the extension cord to overheat and cause fire.
Use the chart provided below to determine the minimum wire
size required in an extension cord. Only round jacketed cords
listed by Underwriter’s Laboratories (UL) should be used.
**Ampere rating (on product data plate)
0-2.0
2.1-3.4
3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0
Cord Length
Wire Size (A.W.G.)
25’ 16 16 16 16 14 14
50’ 16 16 16 14 14 12
100’ 16 16 14 12 10 —
**Used on 12 gauge - 20 amp circuit.
NOTE:
AWG = American Wire Gauge
Use an extension cord that is designed for outside use.
This is indicated by the letters “W-A” or “W” on the cord’s
jacket. Before using an extension cord, inspect it for loose
or exposed wires and cut or worn insulation.
WARNING:
Check extension cords before each use. If damaged
replace immediately. Never use product with a damaged
cord since touching the damaged area could cause
electrical shock resulting in serious injury.
GROUNDING INSTRUCTIONS
This product must be grounded. In the event of a malfunction
or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock.
This appliance is equipped with an electric cord having an
equipment-grounding conductor and a grounding plug. The
plug must be plugged into a matching outlet that is properly
installed and grounded in accordance with all local codes
and ordinances. Plug cord into a GFCI-protected outdoor
receptacle, where available.
Do not modify the plug provided. If it will not fit the outlet,
have the proper outlet installed by a qualified electrician.
WARNING:
Improper connection of the grounding plug can result in
a risk of electric shock. When repair or replacement of
the cord is required, do not connect the grounding wire to
either flat blade terminal. The wire with insulation having
an outer surface that is green with or without yellow
stripes is the grounding wire.
Check with a qualified electrician or service personnel if the
grounding instructions are not completely understood, or if
in doubt as to whether the appliance is properly grounded.
Repair or replace a damaged or worn cord immediately. This
product is for use on a nominal 120 volt circuit and has a
grounding plug similar to the plug illustrated in figure 2. Only
connect the product to an outlet having the same configuration
as the plug. Do not use an adapter with this product.
ELECTRICAL
GROUNDING
PIN
120V GROUNDED
OUTLET
Fig. 2
POWER CORD
