SPC560P-DISP: USB drivers installation
UM2119
DocID029822 Rev 1
4
SPC560P-DISP: USB drivers installation
The GUI needs a dedicated USB driver to enable the serial communication channel. If the
driver is not yet installed or not appropriately configured, the following procedure describes
how to install the Driver or to update the current version.
To install the drivers the board SPC560P-DISP does not need the external supplier; the
USB connection provides the supply voltage.
1.
Disconnect the USB from SPC560P-Discovery
2.
If the UDE Visual Platform 4.2 is already installed as well as the drivers are updated go
to step #7 otherwise continue to next step
3.
Download the SPC5-UDE/STK 4.02.07 from pls-mc web site.
4.
Install the SW; right click on the icon named “ude-4-02-07-spc5-udestk.exe” then select
“Run as Administrator”
Figure 7. UDE software
5.
Accept to install the USB drivers (see
)
Figure 8. USB driver installation
6.
The Drivers installation is completed when the window here below appears (
Pressing the “Finish button” the installation will be completed and the installation
program will be closed.
