Copyright © 2016 ARM Ltd. All rights reserved.
Debug and Trace Configuration
STMicroelectronics STM32F446RE NUCLEO-64 Board
Enable ST-Link Debugger
Select
Options for Target
or press
ALT+F7
.
Go to the
Debug
tab and select the
ST-Link Debugger
.
Connect Using SWD
Click on the
Settings
button. On the
Debug
tab select the Port
SW
. This board
does not support JTAG.
Configure Trace using Serial Wire Viewer
Go to the
Trace
tab and enter the correct CPU
Core Clock
speed as specified in your project. Check the
Trace Enable
box.
When debugging, the Status
bar shows information about
the Trace connection.
