STMicroelectronics STM32100B-EVAL, Руководство пользователя

Страница: 24 / 48

Running the demonstration UM0891
24/48 Doc ID 16982 Rev 1
1. Select Time Adjust . The message shown in Figure 23 is displayed on the LCD. To
modify the first digit of the hour field, use the UP and DOWN push-buttons. Press UP to
display the current value plus one. Press DOWN to display the previous digit value.
2. After setting the digit value, press SEL. The cursor automatically jumps to the next digit.
When all the time digits have been set, the Time submenu appears. Some digit values are
limited to a range of values depending on the field (hour, minute or seconds).
Figure 23. Time Adjust submenu
●
Time Show: this item displays the current time. If time and date have not been
previously configured, a message is displayed, that gives the choice to set the time and
date or, to exit to the upper submenu. When this submenu is selected, the message
shown in
Figure 24 appears on the LCD. In the example, the time has not been set yet.
Figure 24. Time Show submenu
To exit the Time Show submenu, press the SEL push-button. To exit the Time submenu,
select Return and press the SEL push-button.