1 Getting Started
ST7-EPB
6/15
UM0028 Rev 4
1 Getting
Started
Your ST7-EPB programming board is equipped with the sockets you will need to program a
sub-family of ST7 MCUs. In addition, some programming boards also support connections
for In-Circuit Programming (ICP) or In Situ Programming (ISP).
To help you get started programming with your EPB, the following sections provide:
●
Section 1.1
– a checklist of components delivered with your ST7-EPB
●
Section 1.2
– instructions for setting up your programming board
●
Section 1.3
– instructions on the use of programming sockets
●
Section 1.4
– instructions on setting up a connection for in-circuit programming
●
Section 1.5
– additional notes about in situ programming
1.1 Delivery
Checklist
The following items are delivered with your programming board (see
Figure 2
):
1.
One ST7MDTxx-EPB programing board.
2.
One power supply
3.
One parallel cable
Optional
4.
One 10-pin, HE-10 type ribbon cable with programming boards that support ICP or ISP
Figure 2.
Parts delivered with ST7-EPBs (not to scale)
1
2
3
ST7-EPBs come in several types, which support the programming of different families of ST7 and
package types. The sockets and connectors on your programming board will vary depending on the
type of ST7-EPB you have ordered, and may not correspond exactly to the version shown here.
