STMicroelectronics SPC58NHADPT302S, Руководство пользователя

Страница: 12 / 38

6.2 Hyperbus interface
This paragraph describes the Hyperbus interface present on the mini module.
The SPC58NHADPT302S contains only one CS (CNS), whereas the memory device contains two CSs lines, one
for RAM and one for FLASH.
The second CS is emulated using one GPIO signal (PA[15]).
The following table shows the logic between CS/GPIO from SPC58NHADPT302S and CS0/CS1 from HyperRAM/
HyperFlash device
Table 8. Hyperbus CS truth table
CSN GPIO CS0 CS1
0 0 1 0
0 1 0 1
1 0 1 1
1 1 0 1
Figure 5. Hyperbus CS scheme
The following table describes all hardware HyperBus of the mini module, their position on PCB.
Table 9. Hyperbus interface
Symbol Description Position
U14 CMOS Inverter Figure 9. Overview of SPC58NHADPT302S Rev. A mini module - Bottom - C1
IC1 TTL OR Gate Figure 8. Overview of SPC58NHADPT302S Rev. A mini module - Top - B1
U13 RAM 256Mbit Figure 8. Overview of SPC58NHADPT302S Rev. A mini module - Top - B2
UM2725
Hyperbus interface
UM2725 - Rev 1
page 12/38