1.3
STBLESensor app description
1.3.1
SensorTile module activation and transmission
When active (see
Section 1.4.1 Startup
), the SensorTile module can transmit the environmental data to
STBLESensor
app for smartphones and tablets.
To start transmitting data, the SensorTile module has to be virtually connected to the app by the scan procedure
described below.
Step 1.
Launch the STBLESensor app
Step 2.
Click on the
Start Scanning
icon
Figure 3.
STBLESensor app - Start Scanning tab
Step 3.
After a few seconds the app will show the SensorTile module device list identified by the scanning
procedure.
UM2260
STBLESensor app description
UM2260
-
Rev 2
page 4/25
