1
P-NUCLEO-LRWAN2 starter pack overview
starter pack, which includes a LoRaWAN
®
sensor
device and gateway as well as the antennas.
Instructions at the back of the insert card guide the users on how to power up and configure the sensor device
and gateway and setup the network.
The starter pack is configured to use the EU868 frequency band with the sensor device in OTAA mode and
the gateway forwarding the packets to Loriot EU1 server. The pack is user configurable by firmware and by AT
commands.
Figure 2.
STM32 Nucleo LoRaWAN
®
development kit (P-NUCLEO-LRWAN2 starter pack)
The antennas in this product are assembled and locked with the boards, which was not the case in earlier
versions. They do not have to be removed by users to comply with FCC regulations. The current product
packaging is adapted to this configuration. Visuals and illustrations in the related technical documents may differ
from the current product version.
UM2587
P-NUCLEO-LRWAN2 starter pack overview
UM2587
-
Rev 3
page 2/55
