STMicroelectronics L6364W, Руководство пользователя

Страница: 1 / 20

Introduction
The STEVAL-IOD04KT1 is a reference design kit that exploits the features of the L6364W IO-Link dual-channel device
transceiver.
The kit consists of the STEVAL-IOD004V1 main board (not available for sale), the STLINK-V3MINI programmer and debugger
tool, a 14-pin flat cable, and an M8 to M12 standard industrial connector adapter.
The kit acts as a modern smart industrial sensor to be connected to a master IO-Link hub (or a suitable PLC interface).
The power supply for the MCU, sensors, and other logic devices derives from the DC-DC converter controller embedded in the
L6364W .
The on-board STM32G071EB microcontroller runs an IO-Link demo stack v.1.1, which controls the IO-Link communication, and
the software code that manages the L6364W transceiver and the MEMS industrial sensors.
The tiny dimensions of the main board have been achieved thanks to the small sizes of the CSP package options of L6364W
and STM32G071EB .
Connect the main board to an IO-Link master via the adapter and the M8 connector included in the kit for normal operation.
Connect the same board to the
STLINK-V3MINI through the flat cable only if you want to program the STM32G071EB with a
new firmware.
Figure 1. STEVAL-IOD04KT1 evaluation kit
Getting started with the industrial smart sensor kit based on L6364W dual IO-Link
device transceiver
UM2942
User manual
UM2942 - Rev 1 - October 2021
For further information contact your local STMicroelectronics sales office.
www.st.com