STM AUSTRALIA
1/615 WARRIGAL RD
ASHWOOD VIC 3147
AUSTRALIA
T
1300 131 531
F
1300 308 508
E
W
WWW.STM.NET.AU
DG83231 18 Volt 450 Gram Grease Gun
TO CONVERT GUN TO ALLOW FILLING FROM BULK CONTAINER OR FILLER PUMP
1) Unscrew the case tube assembly cap from the grease tube assembly. Pull on the follower handle to exitract the follower
and spring from the grease tube assembly.
2) Grasp follower between thumb and forefinger and flip the follower lip from the rear to the front side
NOTE
: The follower resembles a cup. When the gun is assembled for use with bulk lubricant, the cup opens toward the
pump assembly
3) Reassemble follower into grease tube assembly and position with the follower handle so that the grease tube assembly
cap can be tightened onto the container tube
TO FILL THE GUN FROM BULK CONTAINER
1) Remove grease tube from the gun
2) Insert the open end of the grease tube assembly into lubricant. Slowly pull the follower handle back while pushing the
grease tube assembly deeper into the lubricant to prevent air pockets from being pulled into the grease tube assembly
3) When the follower rod is fully extended, pull it sideways to latch the rod groove into the keyhole slot in the gease tube
assembly cap.
4) Turn the Grease Tube into the gun and release the follower rod from the slot on the end cap of the tube to allow the
follower rod go forward.
5) Clean any excess grease of the gun body
TO EXPEL AIR POCKETS
1) Free the follower rod from the grease tube assembly cap and depress the vent valve when pushing the follower rod
forward
2) Squeeze the switch several times to operate gun until trapped air is expelled. Push the follower rod into the grease tube
assembly
NSPECTION, MAINTENANCE, AND CLEANING
1.
WARNING
Make sure the Switch is in the
"off"position, Battery is removed from the Grease
Gun and unplug the Charger from its electrical
outlet before performing any inspection,
maintenance, or cleaning
2. BEFORE EACH USE, check the general condition of
the Grease Gun. Check for misalignment or binding
of moving parts, cracked or broken parts, leaking
Battery Pack, damaged Hose, and any other
condition that may affect its safe operation. If
abnormal noise or vibration occurs, have the
problem corrected before further use. Do not use
damaged equipment
3. Battery Pack Precautions: Never burn Batteries, as
they can explode in a fire. Do not charge leaking
Batteries. Only a qualified service technician should
perform maintenance on the Battery Pack. Contact
local solid waste authorities for instructions on
correct disposal or recycling of the Battery Pack.
4. DAILY Use a soft, dry cloth, remove all dirt, grease,
and debris from the exterior of the Grease Gun. Do
not use solvents to clean the Grease Gun
5. When storing: Always remove the Battery Pack from
the Grease Guin. Keep the Grease Gun and its
accessories in a clean, dry location and out of
children reach
Replacement Parts:
18V Battery
18V Quick Charger
42" Flex Hose
Nozzle (Coupler)
