STM CANNA REVOLUTION 2.0, Руководство пользователя

Страница: 10 / 17

The Revolution has one auger speed that comes pre-set into the
machine. The auger comes pre-set with ON times and OFF times.
This prevents the clogging of materials and overfeeding the blade.
These times may be changed, but we do not recommend going
below 3 seconds off or more than 15 seconds on.
The amp meter is located in the lower
right corner. When in higher amperage,
the machine will read that and delay the
auger. This allows for the blade chamber
to clear before intoducing more material.
If the meter remains high, you may have
a clog that needs clearing.
TOUCH SCREEN OPERATION
The Revolution has 3 speeds for
operation. High, Medium, and Low,
indicated by the largest to smallest
icons on the touch screen:
HIGH: 100% of motor speed
MEDIUM: 50% of full power
LOW: 10% of full power
AUGER SPEEDS
Video: Revolution Touch Screen - bit.ly/rev-touch-screen
START / STOP
MOTOR SPEEDS
Press the START button to start the
operation and STOP to stop the
operation of the grinder.
AMP METER
PAGE 8 © NOVEMBER 2020 STM CANNA™