5
SpeedTech Lights, Inc © 2019
VIBE
®
SIREN
Programming Low Frequency Broadcast Duration
•
On the Vibe Amp, there is a numbered turn dial with an arrow indicator and 3 green LED indicators.
•
As the dial is adjusted, the green LED indicators will change to confirm adjustments.
•
Broadcast durations for each setting are listed here:
NOTE: Do NOT adjust the dial while the Speaker is in use.
All rights reserved. No part of this Instruction Manual may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means, including but not limited to
photocopying, recording, electronic delivery, .PDF reproduction, or any other means of reproducing all or any part hereof without the express prior written consent of SpeedTech
Lights, Inc, except for non-commercial purposes as permitted by United States copyright law. Customers of SpeedTech Lights, Inc, may download and print this Instruction
Manual for use with products sold to the customer by SpeedTech Lights, Inc. However, no part of this Instruction Manual may be otherwise or subsequently reproduced,
downloaded, disseminated, published, or transferred, in any form or by any means, except with the prior written consent of SpeedTech Lights, Inc.
Number Duration
0
7 seconds
1
15 seconds
2
22 seconds
3
30 seconds
4
37 seconds
5
45 seconds
6
52 seconds
7
60 seconds
Universal Mounting Bracket
•
Take one of the semi-circular brackets and position it behind
the front cover and raised lips in the rear.
•
Take the other semi-circular bracket and position it opposite
the first bracket so that the screw holes on both brackets align.
•
Locate an area in the undercarriage of the vehicle that can be
sandwiched by the bracket and drill 2 holes through that area
to line up with the 2 holes in the bracket.
•
Affix and tighten all hardware to secure the bracket to the unit
and to the vehicle.
