STL Reference:
Date:
Revision:
MWS-Ex-DC
July 2020
IOM-MWS-iss0
Document: Installation and Operations Manual
P a g e
|
4
a. Detection Range:
The sensor sensitivity
can be adjusted by
selecting a combination
of 4 DIP switches to
suit the application.
(50% is the factory default
– switches 1,2 and 4 ON,
switch 3 OFF)
b. Time Delay
The ON-time of the light, after the person/object leaves the
area, can be selected with a combination of 4 DIP
switches.
(5 seconds
‘Walk test mode’ is the factory default – all switches
ON)
c. Daylight Threshold
The threshold can be selected with a combination of 4 DIP
switches. The light will not switch ON if the ambient lux
level exceeds the programmed daylight threshold.
(Please note that the ambient lux level refers to the amount of light reaching
the sensor internally)
.
If the daylight sensor is disabled, the sensor will only
operate when movement is detected.
(Daylight sensor disabled is the factory default
– all switches ON)
4
Contact
STL International Ltd
Hill Farm, Linton Hill
Maidstone, Kent
ME17 4AL
United Kingdom
Tel
: +44 (0)1622 749633
Fax
: +44 (0)1622 746800
Web
Other Sensors:
Microwave Sensor (AC)
Daylight Sensor:
