7
SpeedTech Lights, Inc © 2019
K-FORCE
®
55
FULL LIGHT BAR
All rights reserved. No part of this Instruction Manual may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means, including but not limited to photocopying,
recording, electronic delivery, .PDF reproduction, or any other means of reproducing all or any part hereof without the express prior written consent of SpeedTech Lights, Inc, except for
non-commercial purposes as permitted by United States copyright law. Customers of SpeedTech Lights, Inc, may download and print this Instruction Manual for use with products sold to
the customer by SpeedTech Lights, Inc. However, no part of this Instruction Manual may be otherwise or subsequently reproduced, downloaded, disseminated, published, or transferred,
in any form or by any means, except with the prior written consent of SpeedTech Lights, Inc.
Flash Pattern List
• Steady Burn
• Triple Flash Left/Right Alternating
• Double Flash Left/Right Alternating
• Triple Flash Alternating
• Double Flash Alternating
• Triple Flash Left/Right
• Double Flash Left/Right
• Single Flash Left/Right
• Single Flash Left/Right and Full Combo
• Center Out
• Single Flash
• Single and Quad Flash Full Combo
• Single and Triple Flash Full Combo
• Steady Burn Right Half
• Steady Burn Left Half
• Rapid Pulse Right Half
• Rapid Pulse Left Half
• Steady Burn Right Half. Quad Flash Left Half
• Steady Burn Left Half. Quad Flash Right Half
• Steady Burn Right Half. Single Flash Left Half
• Steady Burn Left Half. Single Flash Right Half
• Quad Flash Left/Right Alternating
• Stacking Right to Left
• Stacking Left to Right
• Stacking and Collapsing Left Right Left
• Single Flash Clockwise Rotation Single LED Chase
• Single Flash Counter Clockwise Rotation Single LED Chase
• Single Flash Clockwise Rotation Double LED Chase
• Single Flash Counter Clockwise Rotation Double LED Chase
• Single Flash Left/Right 120 FPM
• Single Flash 75 FPM
• Accelerating Flash Alternating
Flash Pattern Shortcuts
•
Hold for 2 seconds to toggle Steady Burn mode.
•
Hold for 3 seconds to toggle Random pattern mode.
About Flash Patterns
•
All STL LED products are equipped with a non-volatile memory which will recall the last flash pattern when the Light Bar is turned on.
•
Set the flash pattern by pushing the Flash Pattern button on the Supreme Control Box to cycle through the various patterns.
•
If you are not using the Supreme Control Box, follow the wiring diagram to identify the Flash Pattern wire to manually cycle through patterns.
