STK Professional Audio VP-150, Руководство пользователя

Страница: 5 / 12

5
Ⅳ
Panel Descriptions
FRONT PANEL
1. Mic input level Attenuator
Establishes the required input level for each channel.
2. Signal LED
This LED is show driven channel inputs.
3. AUX input level Attenuators
Establishes the required input level for AUX input channels.
AUX1 is for the cassette deck or CD player.
And AUX2 is for the mixing console or equivalent instruments.
4. Tone Control
The VP-150 can be control LOW and High frequency.
5. Master level Attenuators
This volume control the level of final mixed signal.
6. Output Level Indicator
This level meter indicate the output level.
7. Power Indicator LED
8. Power On/Off Switch
REAR PANEL
AUX 2 AUX 1
1. AC Power Cord
2. Speaker Output terminal
The VP-150 utilize six screw terminal for speaker connection. Two terminals are common output terminals.
Another 4 terminals are 4 ohm, 8 ohm, 70V and 100V output terminals.
For any configuration common terminal will be use with another terminal for speaker connections.
3. TEL Level Attenuators
This volume control the level of telephone paging system signal.
4. TEL Input Terminal
This terminal connect to the telephone paging system.
5. AUX1 Input (RCA, Unbalanced)
These jacks are connect to the CD player or Cassette Deck outputs.
6. AUX2 Input(1/4 "Phone Jacks, unbalanced)
These jacks are connect to the mixing consol outputs
7.Mute Control
A mic 1 input have priority to the other input signal. You can adjust the mute level sensitivity.
8. Mic 1 Input Jacks(XLR, Balanced)
9. Mic 2 and 3 Input Jacks (1/4 " Phone Jacks, Balanced)
10. Line Output (1/4 ", unbalanced)
This output is for use to amplifier Input terminal or link connection systems.