Stiroplus SP1090, Инструкция по эксплуатации

Страница: 16 / 20

15
Descaling indicator
If the descaling indicator illuminates, it indicates the steam generator shall be cleaned by virtue of the mineral
deposits collecting to a degree. And you shall perform descaling by following the operation in Point 3 of
“CLEANING
AND MAINTENANCE” . When the system ensures the mineral deposits have been removed, the indicator will
extinguish.
Cord winding groove
When not in use, the steam supply hose and power cord can be wound along the cord winding groove for storage.
Follow the operation in Point 6 of
“CLEANING AND MAINTENANCE” .
Automatic power off / Energy saving mode
The appliance will turn off automatically after 10 minutes if no steam spray out from the soleplate.
In every first use, the appliance will enter into energy-saving mode when it does not release steam for a long time, or
when it releases steam for less than 2 seconds. To exit from energy-saving mode, just need to hold and press the
steam trigger for more than 2 seconds. The selected steam rate indicator will start blinking and the iron's
temperature indicator will illuminate. After 30 seconds the selected steam rate will stop blinking and the iron’s
temperature indicator will turn off. Then you can continue ironing.
BEFORE FIRST USE
1. Remove any sticker or protective foil from the soleplate.
2. Heat up the iron at the maximum temperature and iron over a piece of damp cloth for several minutes for the
purpose of removing any residue on the soleplate according to the section of “Steam ironing” .
NOTE: It is normal that strange odor comes out from the unit for the first use. This will cease after a short while.
NOTE: Some particles may come out of the soleplate when you use the iron for the first time. This is normal; the
particles are harmless and stop coming out of the iron after a short while.
NOTE: When you switch on the appliance, the steam generator may produce a pumping sound. This is normal;
the sound tells you that water is pumped into the steam generator.
NOTE: During the heating process of the soleplate, there will be little steam coming out from the soleplate
automatically and this phenomenon will continue for about 3 seconds, This is normal.
USING YOUR STEAM STATION
The appliance has two ironing ways. You can use dry ironing or steam ironing, the details refer to the following:
Dry ironing
1. Put the iron on the thermal insulation stand of unit base.
2. Connect the plug to wall outlet and press down the power switch, the power indicator turns on.
3. Turn temperature dial to your desired setting, which is depended on the fabric of garment, and the temperature
indicator will illuminate. The iron starts heating. Refer to
“IRONING TIPS” and “ADDITIONAL TABLE” as below when
select temperature.
4. When the temperature indicator turns off, the selected temperature is reached. You can start ironing now.
WARNING: Never touch hot soleplate at any time before cooling down!
Fig.3