Stiroplus SP1050, Руководство пользователя

Страница: 17 / 19

16
Fig. 3
Unplug and remove the water tank, then put the iron on a flat surface, after it, upend the unit base and put it on a
flat surface, and then rotate the knob clockwise to tighten it (see Fig.4). Finally, upend the unit base and put the iron
on the thermal insulation stand of unit base.
Fig. 4
When do not use the appliance for a long time, empty the water in the reservoir, turn the temperature dial to the
minimum setting and store the steam supply hose and power cord at their respective storage boxes, then put the
appliance at a place out of the reach of children.
IRONING TIPS
-Always check first whether a label with ironing instructions is attached to the article. Follow these ironing
instructions in any case.
-The iron heats up quicker than cooling it down, therefore, you should start ironing the articles requiring the lowest
temperature such as those made of synthetic fiber.
-If the fabric consists of various kinds of fibers, you must always select the lowest ironing temperature to iron the
composition of those fibers.
-Silk and other fabrics that are likely to become shiny should be ironed on their inner side.
-Velvet and other textures that rapidly become shiny should be ironed in one direction with light pressure applied.
Always keep the iron moving at any moment.
-Pure wool fabrics (100% wool) may be ironed with the steam iron. Preferably set temperature dial to the third
position and use a dry cloth as a mat.
- Never iron over zip, rivet in the cloth. This will damage the soleplate. Iron around any such object.
NOTE: When ironing woolen fabrics, shining of the fabric may occur. So, it is suggested that you should turn the
article inside out and iron the reverse side.