CLEANING AND MAINTENANCE
Before cleaning, firstly disconnect the power outlet and let the appliance cool down.
1. Wipe flakes and any other deposits on the soleplate with a damp cloth or a non-abrasive
(liquid) cleaner.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to scrape the
soleplate.
2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on the steam
generator and the thermal insulating cushion with dry cloth.
3. When do not use the appliance for a long time, pour out the water in the tank, and store
the iron on the thermal insulating cushion.
4. To store the device, pull out the cord clamp first and after winding the cord around the
cord winding groove, push the cord clamp back.
ANTICALC FILTER REPLACEMENT
NOTE: The de-calc box has to be replaced every 2-3 months if using running water
(hard water) and twice a year if using purified water.
NOTE: Before replace, remember to immerse the new de-calc box into the water
for 3-5 minutes.
To replace the filter proceed as follows:
1.Detach the water tank and then pull the de-calc box out (see Fig.2).
2.Replace it with a new de-calc box which shall be immersed into the water for 3-5 minutes in
advance.
3.Ensure the new de-calc box is placed in position.
Fig.2
IRONING TIPS
-Always check first whether a label with ironing instructions is attached to the article. Follow
these ironing instructions in any case.
-The iron heats up quicker than cooling it down, therefore, you should start ironing the
articles requiring the lowest temperature such as those made of synthetic fiber.
-If the fabric consists of various kinds of fibers, you must always select the lowest ironing
temperature to iron the composition of those fibers.
-Silk and other fabrics that are likely to become shiny should be ironed on the inner side. -
Velvet and other textures that rapidly become shiny should be ironed in one direction with
light pressure applied. Always keeps the iron moving at any moment.
-Pure wool fabrics (100% wool) may be ironed with the steam iron. Preferably set
temperature dial to the maximum position and use a dry cloth as a mat.
- Never iron over zip, rivet in the cloth. This will damage the soleplate. Iron around any such
object.
NOTE: When ironing woolen fabrics, shining of the fabric may occur. So it is
suggested that you should turn the article inside out and iron the reverse side.
Содержание SP 1016
