17
MODEL: SUC54EEW | PRODUCT CODE: 62878 | 11/2018
Cleaning and Maintenance Cont.
Solid hotplates
• For normal cleaning use a moist cloth.
• For very dirty hotplates use any commercial cleanser.
• After cleaning, remove any cleanser remaining and dry
the hotplate completely by running the element for a short
period.
• Oil the hotplate after cleaning with a thin coating of
cooking oil to prevent rust or corrosion.
• Permanent heat-discolouration of the trim ring is normal.
Note:
Do not use abrasive sponges or scourers, oven sprays or stain removers on hotplates. These may
damage, scratch or stain the cooktop. Any pitting, staining or scratching will not be covered by warranty.
Bulb Replacement
For replacement of bulbs, please follow these instructions:
1. Disconnect the power from the mains power outlet or switch
off the circuit breaker of the units mains outlet.
2. Unscrew the glass lamp cover by turning it anti-clockwise
(Note: it may be stiff) and replace the bulb with a new one of
the same type.
3. Screw the glass lamp cover back in place.
4. Reconnect to power.
Note:
Only use 25W/220V-240V, T300° C halogen lamps. Type
E14.
Removing the oven door
To remove the oven door and subsequently the glass as well, please follow the following steps.
• Open the door to the full extent (fig.1);
• Open the lever A completely on the left and right hinges (fig.2);
• Hold the door as shown in fig.3
• Gently close the door (fig.3) until left and right hinge levers A are hooked to part B of the door (fig.4).
• Withdraw the hinge hooks from their location following arrow C (fig.4);
• Rest the door on a soft surface;
• To replace the door, repeat the above steps in reverse order.
