background image

7 of 40

Operating Manual:   

SU780XLE      

  SU780XLE-LIT-OM-I |

 11.18.19      

www.stirlingultracold.com

User Advisory:

Deep temperatures are dangerous, use proper precautions when operating ultra-
low temperature freezers.  This ultra-low temperature freezer is intended for storage 
of frozen sample product or vials at deep temperatures. Stirling Ultracold, a Division 
of Global Cooling, Inc. cannot be held responsible for damages or loss of stored 
product attributed to unintended use. In no case will Stirling Ultracold, a Division 
of Global Cooling, Inc. be held liable for loss of stored product resulting from 
electrical, mechanical or structural failure.  As with any ultra-low temperature freezer, 
appropriate back-up and redundancy considerations are the responsibility of the 
user.

To assure the correct use of the product, basic safety measures should always be 
followed including the warnings and cautions listed on the product and in this 
operating manual.

Hazard Symbols

This symbol used alone indicates important operating instructions 
which reduce the risk of injury or poor performance of the unit.

CAUTION

:  This symbol, in the context of a CAUTION, indicates a 

potentially hazardous situation which if not avoided could result in minor 
to moderate injury or damage to the equipment.

WARNING

:  This symbol, in the context of a WARNING, indicates 

potentially hazardous situations which, if not avoided, could result in 
serious injury or death.

Flammable warning messages alert the user to possible risks of 
personal injury and equipment damage.  

Degrees of Danger

DANGER

Will lead to severe injuries or death

WARNING

May lead to severe injuries or death

CAUTION

May lead to light to moderate injuries

NOTICE

May lead to material damage

Flammable Refrigerant Use: 

SU780XLE uses 90 grams of R-170 (Ethane) in a hermetically sealed thermosiphon  
tubing. It requires caution in use and repair.

A.

  

Danger

 

– Risk of Fire or Explosion. Flammable Refrigerant Used. 

Do Not Drill  

or Puncture Inner Liner.

1. Introduction

Содержание SU780XLE









































Отзывы: