21
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-GCC60 PRODUCT CODE: 700792 04/2020
Using the ceramic cooktop
Once the cooktop has been connected to the power supply, the buzzer will
emit a beep sound and all indicators light up briefly and then go out. This
indicates that the ceramic cooktop has entered the state of standby mode.
Instructions
Fig. 13
Fig. 14
To start cooking
1. Touch the ON/OFF
control to switch
on the cooktop (Fig. 13). All indicators will
show [ – ].
2. Place a suitable pan on the cooking zone
that you want to use (Fig. 14). Make sure
the bottom of the pan and the surface of
the cooking zone are clean and dry.
3. Select a heat setting by touching the
or
control (Fig. 15) for the cooking
zone you want to use.
IMPORTANT!
• If you do not choose a heat setting
within
1 minute
, the cooktop will automatically
switch off and you will have to start again
at step 1.
• Each cooking zone can be set from power
level 1 to 9.
• You can modify the heat setting at any
time during cooking.
• By holding down either of the
or
control, the value will adjust up or down.
Fig. 15
