manualshive.com logo in svg

Stirling STR-FL80, Инструкция по эксплуатации

Поделиться
Скачать
Stirling STR-FL80 Скачать руководство пользователя страница 21

21

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: STR-FL80   PRODUCT CODE : 11969   11/2019

Instructions (Cont.)

Program notes

The programs table on page 20, opposite, lists each program’s default parameters and 
the range of available options.

Water temperature

This front load washing machine has 

one

 water connection for your 

cold

 water tap. 

Most wash programs have a 

Cold

 wash option, which takes the water straight from the 

tap. A thermostat inside the machine measures the temperature of the incoming water. If 
it is too cold for the water temperature selected, the washer’s internal heating elements 
heat the water to the set temperature.
To change a program’s default water temperature, press the

 Temp.

 button repeatedly 

and select from the options available: Cold, 30

°

C, 40

°

C, 60

°

C, 80

°

C (not all options are 

available for all programs).

Spin Speed

To change a program’s default spin speed, press the 

Spin Speed

 button and select from 

400, 600, 800, 1000, 1200, 1400 RPM (not all options are available for all programs).

+Rinse

To add extra rinse (or more) to a program’s default rinse cycles, press the 

+Rinse

 button. 

Extra rinses are not available for all programs.

Delay start

This function lets you delay the finishing time of the wash by up to 24 hours. It is 
available for all wash programs. To set it:
1.  Use the program dial to switch on the machine and select your desired washing 

program.

2.  Press the 

Delay Start

 button and choose the desired finishing time in one-hourly 

intervals, up to a maximum of 24 hours.

3.  Press the 

Start/Pause

 

button to start the delay operation.

4.  To change the delay time, turn the program dial to the stand-by position and then 

reset the wash program and delay time.

5.  To cancel the delay function, turn the program dial to the stand-by position.
6.  To check the delay time, press the 

Delay Start

 button and the delay time will be 

displayed for five seconds.

NOTE:

 The actual delay time varies depending on the selected program.

Содержание STR-FL80





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды