Quick Start Guide
Model Number
STR-DW14-SS
Capacity
14 Place Settings
Warranty
3 Years In Home
Version
QSG-V1.4
For more information
please visit
www.stirlingappliances.com.au
or call
1300 886 649
For detailed operating instructions, please read the corresponding content in
the instruction manual.
Switching on
Plug the dishwasher in, open the door and press the
POWER button on the control panel.
Adding
detergent
For each wash cycle, fill dishwasher detergent (or a
detergent tablet) into the detergent dispenser compartment
(A). For programs with prewash, also fill some detergent in
compartment (B), if using powder detergent.
Checking
rinse aid
Unless you use a detergent tablet with rinse aid, make sure
there is sufficient liquid rinse aid in the dispenser. Check
the mechanical indicator (C), or the electronic indicator on
the control panel.
Loading the
baskets
Scrape off leftover food, soften burnt food residues with water, then load the baskets
following the dishwasher loading instructions.
Selecting a
program
Close the door and press the
PROGRAM button until the selected program lights up.
Running the
dishwasher
Turn on the water tap. Press the
START/PAUSE button to start the selected program.
The machine will start working after about 10 seconds.
Changing a
program
A running cycle can only be modified if it has been running for a short time. Otherwise the
detergent may have already been released and the water already drained. If this is the case,
the detergent dispenser must be refilled.
Press the
START/PAUSE button. Press and hold the PROGRAM button for more than 3
seconds to cancel the current program. Press the
PROGRAM button again and select a new
program, then press the
START/PAUSE button and the dishwasher will start to work again.
Adding a
forgotten dish
To add a dish/utensil that you forgot to load into the dishwasher
press the
START/PAUSE button, open the door a little
and, when the spray arm stop working, open it completely.
Add the forgotten dish, close the door, press the
START/
PAUSE button and the dishwasher will start to work again.
Power
disruption
during use
If the appliance is switched off or loses power during a wash cycle, when switched on again,
please re-select the washing program and operate the dishwasher according to the original
power-on state.
Shutting down
When the washing cycle is finished, the buzzer will sound for 8 seconds and then stop. Press
the
POWER button to shut down the unit and open the door —
take care as hot steam
After use
Wait about 15 minutes before unloading the dishwasher to avoid scalding, as the dishes
and utensils are still hot and more susceptible to break. They will also dry better. Unload the
dishwasher, starting from the lower basket.
Turn off the power, close the tap and leave the dishwasher door slightly ajar to let moisture
evaporate.
A B
C
WARNING:
Open
the door carefully,
hot steam may
escape!
ä
ä
ä
ä
ä
ä
ä
ä
may escape!