Stirling STR-23RSJAIF, Инструкция по эксплуатации, Страница: 14 / 28

14
AFTER SALES SUPPORT
1300 886 649 info@tempo.org AUS
MODEL:STR-23RSJAIF PRODUCT CODE:43512 10/2014
Auto-restart function
The appliance is preset to restart automatically and keep the selected
settings after a power blackout or a voltage drop. To deactivate this function,
proceed as follows:
Getting Started
1. Switch off the air conditioner and unplug it.
2. Press the emergency button, then plug in
the unit and switch it on again.
3. Keep pressing the emergency button for
more than 10 seconds until you hear four
short beeps, which indicates that the auto-
restart function is off. To reactivate the
function, follow the same procedure until
you hear three short beeps.
Emergency function
If the remote control is lost, lift the front panel
of the unit to access the emergency button,
then proceed as follows:
1. Press the button once (one beep) if you want the air conditioner to work in
FORCED COOLING mode.
2. Press the button twice (two beeps) if you want the unit to work in FORCED
HEATING mode.
3. Press the button again (a single long beep) to switch off the unit. After 30
minutes in forced mode, the air conditioner will automatically start working
in FEEL mode (see page 20 for details).
ON/OFF
NOTE:
•
The shape and position of the emergency button may vary according to
the model, but its function is the same.
• The external static pressure of the heat pump is 0Pa for all models.
Fig. 6
Display PCB