31
After Sales Support
Telephone:
1300 886 649
Email:
info@tempo.org
Installation in recirculating mode
• Drill 6 holes of Ø4mm diameter at the bottom of the hanging cupboard,
as illustrated in Fig. 4 below.
• Put the air outlet on the rangehood, then install the rangehood on the
bottom of the cupboard and secure it in place with the six M4x35mm
screws and washers (Fig. 5).
• Install the L-shaped bracket using two ST3x12mm screws on the bottom
of the hood in order to cover the gap between the back of the rangehood
and cupboard.
Fig. 4
60cm
Fig. 5
Rangehood Installation (Cont.)
After the rangehood
has been properly
installed, insert the
power plug into
an appropriate
electrical outlet and
let the unit run for
a few minutes prior
to using it while
cooking.