23
MODEL: SICT60 | PRODUCT CODE: 60148 | 04/2018
Troubleshooting Cont.
Failures
Please see the following table for the various failures and problems/solutions whilst the cooktop is in operation.
Failure
Problem
Solution A
Solution B
The LED does not
come on when unit is
plugged in.
No power supplied.
Check to see if plug
is secured tightly in
outlet and that outlet is
working.
The accessorial power
board and the display
board connected failure.
Check the connection.
The accessorial power
board is damaged.
Replace the accessorial
power board.
The display board is
damaged.
Replace the display
board.
Some buttons can’t
work, or the LED display
is not normal.
The display board is
damaged.
Replace the display
board.
The Cooking Mode
Indicator comes on, but
heating does not start.
High temperature of the
cooktop.
Ambient temperature
may be too high. Air
Intake or Air Vent may
be blocked.
There is something
wrong with the fan.
Check whether the fan
runs
smoothly:
if not , replace the fan.
The power board is
damaged.
Replace the power
board.
Heating stops suddenly
during operation and the
display flashes
“
u
”
.
The pan type is wrong.
Use the proper pot
(refer to the instruction
manual.)
Pan detection circuit is
damaged, replace the
power board.
The pot diameter is
too small.
Cooker has overheated; Unit is overheated. Wait
for temperature to return
to normal.
Push “ON/OFF” button
to restart unit.
Heating zones of the
same side ( Such as
the first and the second
zone ) would display
“
u
”
.
The power board and the
display board connected
failure;
Check the connection.
The display board of
communicate part is
damaged.
Replace the display
board.
The Main board is
damaged.
Replace the power
board.
Fan motor sounds
abnormal.
The fan motor is
damaged.
Replace the fan.
