Fig.5
Fig.4
NOTE: The cleaning pad may need to be rinsed under water
throughout cleaning. Undo the velcro strap to remove the pad
from the spray bottle head (13) before doing this.
4. Add 6ml of detergent to the spray bottle (15) and then fill with water
until the spray bottle (15) is full. Attach the spray bottle (15) to the
spray bottle head (13) by turning it clockwise until it is secured.
NOTE: The small tube attached to the spray bottle head (13) needs
to be connected to the long tube which is located inside the spray
bottle (Fig.4).
AFTER SALES SUPPORT
MODEL: MWC109 PRODUCT CODE: 48708 03/2015
1300 554 124
AUS
12
Fig.3
Charge the Battery
1. Connect the charging adaptor (16) to a wall power outlet.
2. Insert the charging adaptor (16) to the back of the appliance. The
charging adaptor input (15) on the window cleaner is located on the
underneath of the handle (Fig.5), and should be charged while vertical.
NOTE:
During the charging process, the charge/operations display
will illuminate on and off. Once the battery is fully charged, the light will
stop flashing and will display red.
Warning:
Do not open the battery as
it may cause an electrical short or release
caustic vapours. Do not expose the
battery directly to heat, fire or sunlight.
