11
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: CFG160 PRODUCT CODE: 700707 03/2020
Using the coffee grinder
1. Place the coffee grinder on a flat, level surface.
2. Fit the ground coffee container with its lid in its correct position on the bottom
plate. Check and ensure that the assembly is correctly positioned.
3. Check and ensure that the coffee bean hopper is correctly positioned – the
lock icon should be aligned with the [
|
] marking.
4. Open the lid of the coffee bean hopper and fill the hopper with the desired
quantity of whole coffee beans. Close the lid.
5. Adjust the coffee grind size to your requirements (see "Grind selection" on the
opposite page and Fig. 1, below.
6. Plug the power plug into an appropriate power
outlet and switch on power to the outlet. The grinder
will emit a short beep, indicating that power is
supplied.
7. Rotate the cup dial and select the number of cups:
2, 4, 6, 8, 10 or 12 (Fig. 1).
8. Press the START/STOP button to start grinding.
9. The machine will stop automatically and a buzzer
will sound when enough coffee has been ground for
the number of cups selected.
NOTE:
The amount of ground coffee per cup will vary depending on the type
of coffee used. (Average weight is approximately 8.25g per cup based on grind
setting 19. The coarser the setting, the more coffee will be ground.)
10. Unplug the power cord from the power outlet.
11. Before lifting the ground coffee container off the bottom plate, gently tap at
the sides of the container and chute to ensure that all of the ground coffee
has dropped into the container.
Instructions
IMPORTANT!
• Maximum operating times:
Do not use the coffee grinder continuously for
more than five (5) minutes at a time as the motor could overheat and cause
damage to the appliance. Allow the appliance to rest until the motor has
cooled down.
• Stopping:
If for any reason you need to stop the grinder during operation,
press the START/STOP button.
Fig. 1
