Stirling Black Edition STR-18R32WIFI Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 28

Stirling Black Edition STR-18R32WIFI Скачать руководство пользователя страница 8

8

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: STR-18R32WIFI PRODUCT CODE : 11894 10/2019

Installation Safety Instructions (Cont.)

Site and operation safety

• No open flames:

The sites for installing and maintaining

an air conditioner using refrigerant R32 should be free

from open fires or welding, smoking, drying ovens or

any other heat source higher than 548

°

C, which easily

produces open fire.

• Ventilation necessary:

The installation site should be in a

well-ventilated condition.

• Mind static electricity.
• Protective clothing and anti-static gloves must be

worn.

• Do not use a mobile phone.

Site accessibility

• Choose a site convenient for installation and maintenance.

The air inlets and outlets of both indoor and outdoor units
should not be surrounded by obstacles or close to any
hear source or combustible and/or explosive environment.

• The indoor unit inlet and outlets should be even.
• Avoid areas where there are other electrical products,

power switch plugs and sockets, kitchen cabinets, beds,
sofas or other valuable items directly underneath the
indoor unit.

Refrigerant leak

• If the indoor unit suffers a refrigerant leak during the

installation, it is necessary to immediately turn off the valve
of the outdoor unit.

• Ensure that all installation personnel leave the room until at

least 15 minutes after the refrigerant leak has been fixed.

• If the product is damaged, it must be taken back to the

maintenance station. Do not attempt to weld the refrigerant
pipe or conduct other operations on the user’s site.

«
...
6
7
8
9
10
...
»

Содержание Black Edition STR-18R32WIFI





























Отзывы:

Нет отзывов