Stirling Black Edition MD 18610 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 60

Stirling Black Edition MD 18610 Скачать руководство пользователя страница 16

Cleaning and storage



Before cleaning, switch off the power point and pull out
the plug. Use a soft, dry cloth for cleaning. Avoid the use
of chemical solutions and cleaning products because
these may damage the appliance surface and/or the labels
on it.



When storing the overlocker, always cover it with the
supplied cover to protect the machine from dust.

Package contents

Please check your purchase to ensure that all items are included. If anything
is missing, please contact the customer service (see ‘Service information’ on
page 53).

• Overlock sewing machine

• Foot control, type HKT72C

• User

manual

• Accessories and accessory bag (overview of contents on next page)

DANGER!
Choking and suffocation hazard!

Plastic packaging can be swallowed or used
improperly, creating a risk of suffocation!



Keep packaging material such as plastic film or
plastic bags away from children.

13

AFTER SALES SUPPORT

AUS

1300 884 987

www.medion.com.au

MODEL: MD 18610 PRODUCT CODE: 701495 09/2020

«
...
14
15
16
17
18
...
»

Содержание Black Edition MD 18610





























































Отзывы:

Нет отзывов