13
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: AP230 PRODUCT CODE: 702580 09/2020
Instructions (Cont.)
Using the air purifier
Fan speed
Press the FAN
button to choose the fan speed options:
turbo, high, mid, low — the respective indicator light will illuminate.
Auto mode
Press the FAN button and hold it for 3 seconds to enter Auto mode. In Auto
mode the purifier automatically adjusts the purification level based on the
sensor’s detection data (dust concentration). Press the FAN button again
to exit Auto mode.
Off-timer
Make sure the appliance is switched on before setting the timer.
Press the TIMER button to select the off-timer period: 1 hour, 2 hours, 4 hours,
8 hours — the respective indicator light will illuminate. The appliance will start
timing and shut down automatically after the set period.
Sleep mode
Press the SLEEP button to turn the Sleep mode on or off — the indicator light will
illuminate and the fan speed will change to low; other indicator lights will turn off.
To exit Sleep mode, press any button; the unit will keep running on low speed but
if there is no further operation within three seconds, it will return to Sleep mode.
Ioniser function
Press the ION button to turn the ioniser function on/off — the respective indicator
light will illuminate. This function creates negative ions and discharges them
into the air to help remove dust and other positively charged air pollutants by
electrostatic attraction.
Fig. 9
