Connecting your ProFusion to your company’s network:
1. Connect one end of a CAT5 Ethernet cable to the Ethernet port located on the rear
panel of your ProFusion.
2. Connect the other end of the CAT5 Ethernet cable to your network equipment (router,
hub, or switch).
It is highly recommended that a connectivity test is performed after changing any network
settings. See Testing the Network Settings for instructions.
3. CONNECTING PROFUSION IS TO YOUR NETWORK
Initiating a test connection from the title/artist information screen:
1. Press the * button to access the Control Panel menu system.
2. Press the NAVIGATION DOWN button until the current line indicator (>) is on Network
Control, then press the * button.
4. TESTING THE NETWORK SETTINGS
3. Press the NAVIGATION DOWN button until the current line indicator (>) is on “Set
Con
fi
guration”, then press the * button.
4. Select (>) “Test Connection”, then press the * button.
Connect the white RCA plug of the audio cable into the RCA jack labeled Zone1/L on the
rear panel of your ProFusion. Connect the other white end of the RCA cable into the
corr
esponding input of your amplifier
If you ProF
usion is configured for a single mono zone, use only the RCA jack labelled
Zone 1/l to feed your
amplification equipment. The RCA jack labelled Zone 2/R is active
only when the ProF
usion is configured to provide a single stereo
zone or two mono
zones.
If your ProFusion has been
configured
with two mono zones, connect the red RCA plug of
the audio cable to the RCA jack labeled Zone 2/R on the rear panel of your ProFusion.
Connect the other red end of the RCA cable to the appropriate input of your
amplification
equipment.
2. CONNECTING TO YOUR AMPLIFICATION EQUIPMENT
CALL US
Call Stingray Business Support at 1.888.685.2486 to assure network connectivity. This
step is essential to receive ongoing music and harware updates. Content updates will not
be available until the device has been activated.
[email protected] // 1.888.685.2486
2
ENJOY YOUR MUSIC!
