13
SRK-RAM13H PAC Integration Kit |
RAM Truck
Camera Presets (cont.)
Camera Preset: Bed
Allows the turn signals to activate the
Bed camera for blind spot viewing in
addition to manual activation.
Turn Signal Trigger [LEFT-RIGHT-BOTH]
Sets status of turn signals for camera
activation.
Low Speed Override [ON-OFF]
When set to ON, the turn signals will only
trigger the camera when vehicle speed is
over 3 MPH and automatically shut off an
active camera when vehicle speed falls
below 3 MPH.
Trailer, Inside, Outside, Aux, Baby Presets
The remaining presests allow labeling of various
cameras. These presets require manual camera
activation using the Camera source. There are
no trigger options
User Camera Settings
Selecting Camera as the source from the Main
Menu or Tabs will allow manual activation of
any installed camera.
Selecting Settings from the Camera source will
allow users to turn Camera Preset trigger options
On and Off.
Whenever a camera is triggered and displayed
on the screen, users can touch the display to turn
off the camera image and return to the current
source.
The settings shown above will activate the Bed
Camera for as long as the turn signal is active
and vehicle speed is over 3 MPH.
