Stim Choice 4000, Руководство по установке

Страница: 31 / 44

INSTRUCTION MANUAL
30
CLEANING AND STORAGE
KEEPING ELECTRODES CLEAN
Ensure the device is completely turned off when removing the
electrodes from the treatment area.
Disconnect the electrodes from each lead wire and place on protective
liner supplied with the electrodes.
If electrodes are difficult to attach to the skin or the protective liner,
they may still be have more uses left prior to replacing. Try placing a
small drop of water on your cleaned fingertip and rub the water across
the entire gel part.
Place the electrode gel part, face up and let it air dry until the water is
absorbed and reconstituted.
DO NOT
wipe with a tissue or cloth.
If the electrodes are still not sticking completely to the treatment area
without any lifting, they
MUST
be replaced with new electrodes.
CAUTION
• The life of electrodes is dependent on many factors including, but not
limited to, cleanliness of treatment area, oiliness of skin, amount of hair,
increased sweating, storage state, etc.
• If the electrodes are lifting or no longer stick to the treatment area, they MUST
be replaced to avoid sudden shock or possible burns on any of the applied
electrodes, including the electrodes adhered correctly and completely.
• Before applying self-adhesive electrodes, it is recommended to wash the area
with mild soap and water, completely drying the treatment area
before placement.
• NEVER remove the electrodes while the device is turned on.
• It is recommended to use the same size electrodes that are supplied with the
device for replacement electrodes. Electrodes smaller than those provided may
increase the chance of skin irritation or electrode burns. Electrodes larger than
those provided may reduce the effect of stimulation, which could result in a false
need to increase the intensity resulting in electrode burns or shocks.
• If needing new electrodes, replace with any StimChoice electrode that is
2” x 2” or larger in size.
• Use of larger electrodes may reduce the effect of the stimulation.
Use of electrodes that are much smaller than the electrodes provided
with the StimChoice 4000 may increase the chance of skin irritation or electrode
burns occurring under the electrodes.
• ALWAYS use electrodes that have been cleared for marketing by the FDA.