© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved.
Mounting instructions for cableway „funis“
Item No. 517021101
State: 10/10/2014 · S. 3
· MS/TSA
Mounting instructions for cableway „funis“
7. Mould the area around the equipment as shown in Diagram 2.
Recommended surface material: grass, sand, bark mulch, gravel, synth. fall
protection. (Critical drop height ≤ 1000 mm)
8. Fasten the rope to the eyelet and hang in the brake springs (brake spring at
the exit: 3000 mm – brake spring at the start: 1000 mm) and the cable car.
Mount the chain tightener, screw the rope onto it and tighten the rope bytur-
ning the chain tightener (rope sagging of 1% - max. 2%).
9. Important note: Minimum distance of seat (with load) to ground is 400
mm!
10. The brake spring at the exit has to be fi xed in such a way that with a load of
130 kg on the seat and with a defl ection of 45° a barrier-free space of 2.00 m
is still guaranteed (see Diagram 5).
11. Hang the swing seat into the cable car and fasten it with screws.
12. Do not allow children to use the equipment before the installation has been
finished.
Diagram 4: Reinforcement Plan
C 25/30, XC 2, XF 1, 3400 / 1200 / 600 mm mit Mindestüberdeckung (Sand) 450 mm
Reinforcement cage Bü.-Ma. R 188 A, with 6 bars Ø 12 mm above and below, provide
case for supports or embed one directly in concrete
2 x 1500 mm = 3 x BüMa R 188 A, 2150 x 3500 mm
2 x 12 = 24 bars Ø 12 mm, l = 3800 mm
Reinforcement Plan
1
1
1100 mm
500 mm
150 mm
150 mm
