© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • Alle Rechte und Produktmodifikationen vorbehalten
Mounting instructions for climbing equipment „collis 190“
Item-No. 51 5511 401
State: 27.04.2017 p. 4
Diagramm 4: Top view dimension details
7600
7300
OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Collis
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev
Name
Änderung
Datum
0901-00-00
1:40
A3
Gewicht
Name
Name
Draufsicht
0901-00-00
230064.20
Maßstab
Mattheis
22.07.16
a Mindestraum Dimensionen korrigiert
27.04.17 DB
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
10. Drill holes into all foundations and screw the play equipment into the foun-
dations with the included heavy-duty dowels.
11. Seal the foundation with the safety cover required for the height of fall
indicated.
Critical drop height: 1900 mm.
Recommended surface material: sand, wood chip, gravel,
synth. fall protection.
12. After 3 months, check the screws at the joints and retighten them if
necessary.
13. Do not allow children to use the equipment before the installation has
been finished.
Attention:
If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that
the equipment shall not be used in such cases.
NOTE:
Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may
rub
off and leave small steel particles in combination with moisture brown rust
stains. If such corrosion occur on stainless steel parts, they are fine to remove
with an abrasive (240 grit).
Please take care when transporting and setting up the fact that the compo-
nents are made of stainless steel with no „normal“ steel parts in contact.
