Stillwater Designs Kicker SX Series, Руководство пользователя

Страница: 25 / 42

25
SX .1 Series Amplifiers
Opera
tion
hi-pass
MENU - Here is where you adjust the high pass
crossover. Your options are
frequency
and
SLOPE
.
Press the
(17
key to enter the
LO-PASS adjustment menu.
Use the
83
and
'2:1
keys to
scroll through
frequency
and
SLOPE
and press the
(17
key to select.
FREQUENCY
selects the crossover point and can be set at any
1 Hz spaced frequency from
10 Hz
to
60 H
z.
Use the
83
and
'2:1
keys to
select your frequency. Press the
(6&
key to return to the HI-PASS menu.
SLOPE
selects the rolloff of the crossover and can be set
from
OFF
to
24 dB
in 6 dB steps.
Use the 83 and '2:1 keys to
select your slope. Press the
(6&
to return to the HI-PASS menu.
NOTE...
While adjusting the high pass crossover you will
notice the
hpf
indicator on the
ISIS
VFD display is
lit. This indicates you are in the HI-PASS crossover menu.
The KICKER SX amplifier monitors and prevents any high
pass crossover point from being any closer than 1/3 octave
from the low pass crossover point. If you cannot set the high
pass crossover where you want then check the
LPF
indicator
and see if it is flashing. If it is then you need to go to the
LO-PASS menu and lower the low pass crossover point.
This is done as a safety precaution to prevent a notch
filter condition.
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC
HOME
ENT
ESC
All manuals and user guides at all-guides.com