STILLE Double-wide Shelves 3-tier, Инструкция по сборке, Страница: 13 / 16

11
Double-wide Shelves 3-tier
Install Anti-tip Straps
Install Wall Cleats
1) Thread the anti-tip straps through the wall
cleats and around the vertical poles.
2) Tighten the strap to remove slack. Do not
over-tighten. Over-tightening the straps may
cause your Stille unit to tip backwards.
3) For a neater finish, trim off extra strap with
scissors as required.
1) Mark and drill pilot holes into the wall. If
securing into a wood stud, use a 1/8" drill bit.
If securing into drywall or plaster using the
included anchors, use a 1/4" drill bit.
2) If using the drywall anchors, insert them
into the pilot holes.
3) Using a screwdriver, secure the cleats onto
the wall using the included screws. Make sure
the wall cleats are oriented horizontally.
Anti-tip Restraints
To help prevent tip-over, install the included
anti-tip restraints per these instructions.
Anti-tip restraints should be installed at the
top of the unit as indicated.
If possible, secure the restraints into a wood
stud. For drywall and plaster walls use the
included anchors.
Pilot Hole
Drywall Anchor
Cleat
Screw