Truck operating instructions
The trucks are designed for indoor and out-
door use in non-hazardous atmospheres. The
temperature should be between -10°C and
+45°C and the relative humidity of the air less
than 95%.
NOTE
A cold store option is available for lower tem-
peratures.
The places where the truck is used must com-
ply with the applicable regulations (condition
of the ground, lighting etc.).
The trucks must be used on dry, clean and
flat ground.
Before using the truck, it is essential to check
the working environment. This check can take
the form of visual inspection.
The work area must be clear. The truck's path
must be free of obstacles and people.
The forklift operator must be alert to anything
that might prevent manoeuvres being carried
out safely. The following may create a poten-
tial danger:
●
A person near the truck
●
The forklift operator must not use an MP3
player or any other electrical equipment that
could impair awareness of his/her surround-
ings
●
There must be no signs of oil or grease on
the floor
The forklift operator must take care when
transporting a load. The load dimensions can
interfere with manoeuvres and restrict the field
of vision. The speed of the truck must also be
reduced as the truck could tip over when
breaking or cornering.
The loads must be consistent, with a maxi-
mum recommended height of 2 m.
For uses other than those shown above,
please consult the After-Sales Service Centre.
It is important to use pallets that are in good
condition.
Speed must be reduced when moving over
obstacles to prevent the truck from becoming
unbalanced and vibrations in the forklift opera-
tor's arms.
The trucks can drive across ramps and shal-
low inclines. With an initial lift, they can cross
larger obstacles.
WARNING
Risk of loss of stability
–
Always adapt your driving to the ground condi-
tions (uneven surfaces etc.), particularly hazard-
ous working areas and the load.
NOTE
●
To prevent the bottom of the load lift system
from scraping the ground, always move the
load arms to the raised position before set-
ting off
●
Always switch off the ignition before leaving
the truck
WARNING
Risk of injury
Always keep your hands on the controls. Never put
your hands near moving parts and assemblies with-
out first lowering the load arms to the ground and
disconnecting the battery.
For effective protection, safety shoes must be worn.
WARNING
Driving safety guidelines:
–
The driver must drive slowly around corners and
when entering narrow passageways.
–
The driver must always maintain a safe braking
distance from vehicles or people in front of him.
–
The driver must avoid stopping suddenly, making
U-turns too quickly and overtaking in dangerous
areas with poor visibility.
Use
4
Truck operating instructions
36
11548011551 EN - 02/2021 - 07
Содержание SXH-20
