Still LXT 120, Оригинальное руководство пользователя

Страница: 93 / 324

Pre-Shift Check
Description of the Pre-Shift
Checks (variant)
The Pre-Shift Check is a guided dialogue in
the display-operating unit. It also helps the
driver conduct the necessary "visual inspec-
tions and function checking" before everyday
use. After the industrial truck has been switch-
ed on, the driver must answer
Yes
or
No
to
questions about the condition of the industrial
truck.
In the meantime, the functions of the industrial
truck are restricted. The driving speed and hy-
draulic functions are restricted.
To commission the industrial truck, the author-
ised service centre can compile the Pre-Shift
Check from a question catalogue in consulta-
tion with the fleet manager. If a question cata-
logue has not been compiled, the only ques-
tion stored by default is
Truck ready for
operation?
If the question is answered with No, an entry
is made in the history. No restrictions to the
functions of the industrial truck are stored by
default for this scenario. The authorised serv-
ice centre can replace this question with a
question from the question catalogue.
In addition, the fleet manager has the follow-
ing options:
●
The fleet manager can view the results of
all checks via the
History
.
●
The fleet manager can define the shift
start for three different shifts. The Pre-Shift
Check must be performed when these shifts
start.
If the industrial truck is equipped with
"FleetManager", the shifts are defined on
the FleetManager interface. See the rele-
vant operating instructions.
●
If industrial truck functions are restricted
due to a negative test result, the fleet man-
ager can reset these restrictions.
●
The fleet manager can specify the question
sequence.
Operation
4
Pre-Shift Check
81 50078078001 EN - 07/2022 - 04