Still KANVAN-05 Скачать руководство пользователя

Страница: 105 / 164

Operation

Digicode

The factory setting of this code is "1234". The

pool manager is advised to replace this code

with a new master code ⇒ Chapter "Deleting

a master code", P. 5-99 or ⇒ Chapter "Adding

the master code", P. 5-97.
Like the driver’s code, it is used for the regular

operation and use of the truck, but it also

allows the addition or deletion of a driver’s

code. This control can store a maximum of

ﬁve master codes.

NOTE

If master codes or driver’s codes are forgotten

or get lost, please contact the Service Engin-

eer, for he alone can make the stored codes

visible.

Service code

The service code is only intended for the

after-sales service. It allows the diagnosis

of the truck for inspections and the access to

the driver’s and master code.

Adding the master code

NOTE

The truck is turned off, the battery is connec-

ted.

123

456

789

PRG

1044_505-009

– Press the

(ON) button (5).

– Enter a valid 4-digit master code with the

buttons

123

(1),

456

(2) and

789

(3).

50108043033 [EN]

Содержание KANVAN-05





































































































































































Результаты поиска

Содержание KANVAN-05

Отзывы:

Похожие инструкции для KANVAN-05

Бренды по названию

Популярные бренды

Still KANVAN-05, Оригинальное руководство пользователя

Результаты поиска

Содержание KANVAN-05

Отзывы:

Похожие инструкции для KANVAN-05

Бренды по названию

Популярные бренды